Bulid Your Pond
No contractors needed – we’ll guide you through every step of building your own backyard pond oasis with ease.
What You’ll Need
Here’s everything you’ll need to get your Poposoap pond project started. We recommend using our complete product set for a smooth installation and best results.
Pond Liner: Flexible pond liner to shape your pond.
Pond Pump: Choose based on your pond volume. Use our pond volume calculator.
Filtartion: Clean water and prevent green algae.
Battery Backup(Optional): Provide power.
Stones, plants: Decorate and weigh down the liner.
Tools: Shovel, scissors, tape measure, level, stone, fountain nozzle, etc.:
Step 1: Choose Your Pond Location
Choose a level spot with direct sunlight (for solar pumps)
Avoid tree roots and low-lying areas
Easy access for maintenance
Step 2: Dig the Pond Outline
Outline the pond with spray paint or rope
Dig 1.5 ft deep (3 ft for koi)
Remove sharp objects and level the base
Step 3: Install the Liner & Pump
Lay the pond liner and trim edges (12" overlap recommended)
Press into creases, smooth out wrinkles
Place the Poposoap pump at the bottom center
Install solar panel or battery backup outside the pond
Step 4: Fill with Water & Decorate
Fill gradually and adjust liner as needed
Use rocks and plants to cover edges
Turn on pump and enjoy the soothing fountain!
Ready to Get Started?
Choose your Poposoap pond product to open your beautiful water feature!
